According to China Photo Network's inquiry on the National Group Standards Information Platform, the group standard "Lighting Devices for Easy-to-Repair Shared Bicycle Parking Spots" proposed and coordinated by the National Federation of Urban Industrial Products Trade Centers has been recently released and will be launched in 2023. It will be officially implemented on December 28.

The standard was drafted by Wuhan Xushengyuan Garden Engineering Co., Ltd., Wuhan Jiuyuan Construction Labor Service Co., Ltd., Wuhan Xinyu Decoration Engineering Co., Ltd., Wuhan Green Fiber Environmental Protection Technology Co., Ltd., and Wuhan Langlang Ouyuan Construction Engineering Co., Ltd., and stipulates convenience Terms and definitions, structure and principles, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage of lighting devices for shared bicycle parking spots that are maintained, applicable to the production and production of lighting devices for shared bicycle parking spots that are easy to maintain. test.

The standard states in the requirements for lamps that the design and structure of the lamps should be such that they can work safely during normal use without causing danger to people or the surrounding environment. All prescribed tests are usually used to check their qualifications; when emitting light, The color rendering index should not be less than 60; the life of gas discharge light source lamps should not be less than 25,000h, and the life of solid-state light source lamps should not be less than 50,000h; LED lamps should meet the requirements of safety, reliability, advanced technology, economical and reasonable, energy saving, environmental protection and easy maintenance. The control device of LED lamps should be easy to replace and repair on site, and the light source should be easy to replace.

One thing worth paying attention to is that the standard mentions that the brightness of the lighting device must not only reach an appropriate standard to allow the vehicle to accurately push and push out of the parking spot, but also be enough to illuminate all parking spots to allow users to activate the bicycle scanner. The process of parking, parking and returning is more convenient and faster.

In addition, the standard also states in the illumination, energy saving, environment and other requirements that the lighting effects and design produced by lighting facilities should conform to actual usage conditions; the energy efficiency level of lamps should not be lower than the second-level requirements; lighting decoration should be at -40°C It should be able to work normally under the conditions of ~50°C, and should meet other special requirements such as ambient temperature, humidity, dust and corrosiveness of the specific place of use.

Today, when urban lighting renovation is in full swing, the introduction of "Easy-to-maintain Lighting Devices for Shared Bicycle Parking Points" will provide a new channel for lighting companies to participate in the construction of urban public facility lighting, empowering the national lighting industry and infrastructure. integrated development.